| Normal Consistency |
| Setting time (Initial and Final) |
| Fineness (Blaine’s) |
| Fineness (Sieving) |
| Soundness test (Autoclave) |
| Soundness (Lechatlier) |
| Specific Gravity of cement |
| Tensile Strength of cement |
| Compressive Strength of Cement mortar (3, 7 & 28 days) |
| Heat of Hydration |
| Abrasion Test (CA) |
| Impact Test |
| Specific gravity (Coarse Aggregate) |
| Percent Water Absorption (Coarse Aggregate) |
| Soundness 5 cycles (Coarse Aggregate) |
| Alternate wetting and drying (10 cycles) |
| Unit weight (fine aggregate) |
| Sieving and grading |
| Unit weight (coarse aggregate) |
| Aggregate crushing value |
| Alkali aggregate reactivity (Mortar bar test) |
| Grading and fineness modulus |
| Specific gravity (fine aggregate) |
| Silt and clay content |
| Organic impurities |
| Mica content |
| Soundness test (fine aggregate) |
| Compressive strength of sand mortar |
| Workability of concrete (slump cone) |
| Testing of 1 set of 3 concrete cubes |
| Unit weight of concrete |
| Flexural strength of concrete |
| Entrained air content of concrete |
| Design of concrete mixes |
| Permeability of concrete |
| Pneumatic sand blast on Concrete |
| Crushing strength 2" rock cubes |
| Pneumatic sand blast in surface |
| Tensile strength of M.S Bar |
| Compressive strength of bricks (solid brick/5 nos) |
| Compressive strength of bricks Perforated 5 nos |
| Water absorption (cold water) |
| Water absorption |
| Arizona slant shear test |
| Drying shrinkage test for epoxy mortar |
| Specific heat of concrete |
| Thermal conductivity |
| Compressive strength of epoxy mortar |
| Efflorescence |
| Warpage (for solid and perforated bricks) |
| Lime reactivity test |
| Water absorption of masonry rock/stone |
| Porosity of masonry |
| Durability test of masonry rock |
| Transverse strength of building stone |
| Bond test for M.S bars (medium tensile steel bars) |
| Testing of concrete and Rock cubes (30 cm) on Bi-axial test equipment |
| Testing of one set of 3 concrete cylinders (50 x 100 cm) |
| Water Retention by concrete curing materials |
| Percent water absorption of fine aggregate (Natural/crushed/Blended) |
| Accelerated Alkali Aggregate test (Mortar Bar test) |
| Elastic Parameters of Concrete cylinder (15 x 30 cm) set of 3 cylinders |
| Accelerated Pozzalonic Activity Index test on MicroSilica |
| Underwater Abrasion test as per ASTM for a set of 3 concrete cylindrical samples |
| Bond strength of epoxy-resin system used with concrete by slant shear (Set 3 cylinders for bond strength and one cylinder for compression) |
| Rapid Chloride Penetration Test (RCPT) for chloride ion penetrability (set of 3 samples) (Without casting/drilling) |
| Rapid Chloride Penetration Test (RCPT) for chloride ion penetrability (set of 3 samples) |
| Elongation Index |
| Flakiness Index |
| Materials finer than 75-microns (coarse and fine) |